HVAC Cleaning, Spring time cleaning!

Here are some critical HVAC maintenance tasks you shouldn’t forget

The spring season is a time for new beginnings, which includes HVAC Cleaning and your home from top to bottom. How come? When you neglect your unit’s maintenance, it could lose efficiency and have a shorter lifespan. For your HVAC system to run all season smoothly long, you should perform these six tasks as part of your seasonal routine.

Ensure your air filters are clean and replace them as necessary

Regularly checking and replacing your air filter are essential things you can do to maintain your Irving HVAC system. A dirty or clogged air filter reduces airflow. It makes your system work harder to circulate air, decreasing efficiency and increasing energy costs.

We recommend that you change your air filter every three months. Still, you may need to do so more frequently or less frequently, depending on the type of filter that you have and the environment in which you live.

HVAC Cleaning is essential for your unit to work efficiently for your home.

Make sure your vents and registers are clean.

A spring cleaning checklist should also include cleaning the vents and registers in your home. As dust and debris accumulate, they block airflow, making your system work harder.

Keeping your vents and registers clean is as simple as removing them from the wall or floor and vacuuming away dirt and debris. You may have to wash them with soap and water depending on how dirty they are.

Make sure your ductwork is in good shape.

Aside from cleaning your vents and registers, ensure your ductwork is free of leaks or other damage. A leaky ductwork system can reduce your system’s efficiency and introduce harmful pollutants into your home.

A professional Dallas HVAC contractor can inspect and repair your ductwork if you suspect a problem.
Make sure your outdoor unit is clean.

In addition to the indoor components of your Irving HVAC system, you should also take care of the outdoor unit.

Clean the area around the unit by removing any leaves, twigs, and accumulated dirt. Then, use a garden hose to spray down the unit and remove any grime that has built up. Before cleaning the unit, make sure it is disconnected from power!

Make sure your thermostat is working.

It would help to have a properly functioning thermostat to ensure your HVAC system works properly. Your thermostat can cause significant problems when it is outdated or not functioning correctly, such as decreased efficiency and uneven temperatures.

Get a professional Dallas HVAC contractor to check and replace your thermostat if it isn’t functioning correctly. You can even control the temperature in your home with a smartphone app on some newer models.

Get your HVAC system inspected by a professional

Last but not least, you should schedule a professional inspection of your HVAC system once a year call Blessed Electric to have a professional have a look. When you have a professional review done, they will identify potential problems before they become major repair issues, saving you time and money. During this time, duct cleaning is also a great way to remove debris, dust, and pollutants.

10 Tips to stay warm during the Winter

Winter is when your home should be a cozy haven away from the freezing temperatures. Thermostats can be an excellent way to warm your house, but they can also impact your energy bills.

Warming and weatherizing your home in the winter can help you keep your heating bill low without sacrificing comfort. You should install updated windows and inspect the insulation in your attic as permanent measures. If the skies are blue, you can let in warm air from the sun by purchasing a door draft stopper.

The following tricks will keep the cool air out of your home and the warm air in.

Warm and Cozy House

  1. Install Programable Thermostat
    1. Using a programmable thermostat gives you more control over the temperature in your home throughout the day so that it does not remain at 68°F throughout the day. During the day, keep your house warm, and then set your thermostat to lower the temperature when you’re away. If you arrive home or wake up in a cold place, schedule the temperature to return to normal before you step inside.
    2. The Home Depot sells intelligent thermostats that you can adjust from your phone even when you’re not home ($249, The Home Depot). Saving tons on heating costs is easy with this DIY upgrade.
    3. Intelligent learning thermostats automatically program based on your preferences and patterns while home based on your current temperature, and “The thermostat will adjust according to your patterns and settings as the weather outside changes,” According to Thumbtack’s Senior Director of Strategic Partnerships and New Ventures, David Steckel. During the day, if the thermostat does not see any movement for a couple of hours, it will calculate that you are not home, so it won’t turn on the furnace. This will save you up to 10% on your heating bill.”
  2. Making sure heating vents are open and not blocked
    1. Blessed Electric and Air’s Jeff Robertson says closing vents does not save money because unused rooms are not heated. In Robertson’s opinion, the HVAC system at your home is vital to provide hot air in every room, regardless of how many open vents.
    2. Partially closing vents can help pump air into the right areas, but leave them open at least 25%. ” Your system will overwork if your ducts are fully closed, leading to higher energy bills and damage over time.
    3. Ensure your home’s warm-air vents, radiators, and other heaters are not blocked, so your heating system works as efficiently as possible. Ensure no obstructions to airflow, such as rugs, furniture, or curtains. To prevent dust buildup, make sure you regularly clean your furnace filter and clean these areas.
  3. Add Draft Door Stopper
    1. Doorways are easy entry points for cold air, but draft guards can keep it out. These handy objects are wrapped in fabric and weighted with sand to keep a chilled atmosphere from entering through the front door. Making your own is an option if you so desire. Make a doorway cover by cutting a length of fabric into a tube, sewing it together, then filling it with stuffing and closing it. Adding a draft stopper to the door will not stop the cool breeze from wafting in when you open it, but it will help when it is closed.
  4. Insulate windows with bubble wrap or plastic film.
    1. Bubble wrap and plastic film can insulate windows very quickly and cheaply. These window film insulation kits use transparent shrink film to create a protective barrier around drafty windows. Using a hairdryer, seal the plastic sheet to the adhesive tape after cutting it to the size of your window. The Wrap peels off cleanly at the end of the season.
    2. If you plan to use bubble wrap, choose a medium to large size ($15, Target). Small bubble wrap is too thin to block cold air and will not be as effective as oversized bubble wrap. Be sure to measure your windows before cutting the bubble wrap. Once that is done thoroughly, spray the window with a thin layer of water. The bubble wrap should be pressed to the window right after pouring, with the bubbles facing the glass. Bubble wrap will stick to the water and stay intact all winter long, keeping you warm.
  5. Seal your Windows
    1. Another good thing you can do is seal your windows. The best way to keep drafts out of your home is to replace old caulking and add weatherstripping, says Robertson. The first step in this process is to remove all corroding caulk from the frame. Remove the old caulk and use a caulk gun to apply a new layer. Apply a thin layer of caulk and smooth it out with your finger. In addition to sealing your windows’ exterior, you should close the interior.
    2. “In addition to updating your windows, this is an excellent time to switch to storm or insulated windows so that you can improve your home’s energy efficiency and stay warm this winter,” suggests Robertson.
  6. Open Curtains on a sunny day
    1. You can use this housewarming hack for free! Make sure you check the weather before you leave for the day. Let nature heat your home for free by opening the blinds and curtains around the house when the sun is out. Close all curtains at night to keep cold air out.
  7. Put your ceiling fans on reverse.
    1. Here’s a hack that usually goes unnoticed. According to Robertson, your ceiling fan operates clockwise during summer to pull warm air upward. During the winter, fans can also keep your home warm.

    2. “You can set them to run counterclockwise, which circulates the air and pushes warm air down,” Robertson says.

  8. Keep interior doors open.
    1. I am not referring to the outside doors in your home but to the gates surrounding the interior. There may seem to be some contradiction between closed doors to some rooms and the theory that they require less heating overall. It will help regulate the house’s temperature and keep your doors open. Robertson says this will allow air to circulate throughout the home.
    2. “Blocking off unconnected areas of the HVAC system, which have no purpose without it, makes sense,” Robertson says.”Where there are vents, heat will come out, and internal opening doors will circulate the [warm] air.”

  9. Boost insulation
    1. Checking your insulation as winter approaches can save you money, even if it is a little more involved. A thorough inspection of your insulation may be in order if you haven’t done so for a while. Added insulation to your home will help regulate the temperature and prevent energy loss through your basement and attic.
  10. Bake some treats
    1. Want to get warm fast? Here’s an idea. Turn on the oven to warm the house as you bake your favorite treat. Just a crack in the oven door, while it’s cooling is all you need to do when it has finished baking.

IMPORTANT: When the oven door has been open, turn it off. You can quickly and inexpensively heat your kitchen with heat. After all the heat has come out, close the door. If you have pets or small children, it is not advisable to do this.

Preventing Rodent’s

 

December will bring in those chilly temperatures. The cooler weather tends to drive unwanted outside visitors into our homes. Why is this important to note in relation to our electrical system? Well, rodents love to chew and seem to have a particular penchant for the insulation on your electrical work, which can damage your home systems and even cause a fire. Yes, rodents damage your electrical system! Here are a few tips on how to keep these furry pests away.

Signs to look out for that you may have an unwanted guest

  • LOOK: Rodents will leave signs that they are around. You just need to look

For them. The telltale sign that they are in our home is to see droppings.

Surely, you’ve seen them before they are a little black or grey and oval-shaped.

You may also spot nesting material in enclosed spaces. These materials can be

of numerous materials such as string, twine, insulation, leaves, or clothing.

 

  • LISTEN: You can tell if there is something crawling, scratching, or chewing on your

walls by listening for the noises

 

Winter is a good time to check your wiring!

  • Make sure your wiring is in good condition and hasn’t been chewed on periodically by inspecting the insulation. Of course, you will not be able to see what is behind your walls, but you will notice by looking around the house where you can see.
  • Pay attention to unexplained electrical problems. It’s possible that rodents are damaging your electrical system if you notice that some rooms or circuits do not have reliable power or if your breakers keep tripping without reason.

 

If you spot signs that a rodent or rodents are in your home, make sure to act promptly to remove them. The longer they stay housed inside, the more havoc they can cause.

  • Call a Professional
  • Combat the issue on your own using various traps and poisons available at the local store. Always read the instructions carefully to ensure the proper use of any method you decide to use. After all, safety in your home is the goal here.
  • Cats! They are a great deterrent for keeping rodents from damaging your electrical system and away from or out of your home.
  • The best way to avoid rodents from damaging your electrical system is to keep them out of your home. Caulk, foam spray, or other barriers can seal any cracks or holes around your home. Keep in mind that it is not uncommon for rodents to find tiny cracks or even chew their way in.

 

Remember, chewed wires in your home are a safety concern!

If you suspect rodents may have chewed through your electrical work, contact an expert DFW electrician immediately.

 

 

 

 

 

 

 

                            

 

Interesting Facts About Our Licensed Electrical Contractors in Austin, Fort Worth, TX and Nearby Cities

At Blessed Electric, we are one of the bestlicensed electrical contractors in Austin, Fort Worth, TX, and nearby cities. One reason why we are the best at what we do is that we hire only the best and most experienced electricians. There are certain interesting facts about our electricians and we will share the facts with you right away.

1. Our electricians are versatile

Believe it when we tell you that our electricians do much more than troubleshooting and fixing electrical issues. They are able to learn how to use sophisticated tools very fast. Also, they are logical thinkers because logical thinking is required for troubleshooting electrical faults.

They can examine and interpret blueprints. Although each of them can work individually, they are great team players. Even though we have a separate customer service team, all our electricians also possess great customer service skills. Finally, we have trained them to be able to deliver under pressure.

2.They follow standard safety protocols

You’ll agree that electricity is indispensable and dangerous. That’s why our electricians have been trained on safety. They have taken and passed several safety examinations. For their safety, your safety, and the safety of your property, our licensed electrical contractors in Austin will follow standard safety guidelines in all circumstances.  You can be sure that they will follow appropriate building codes for electrical installations.

3. The profession takes years 

You may not know that electricians take several years to master their job. In fact, it takes about 7 years to become a master electrician, and learning never stops for them. Our electricians are highly experienced. They have spent several years on the job. So, when you hire Blessed Electric, you don’t need to worry about experience. We’ve got it.

In spite of their skills and experience, we send them on training regularly because we are constantly looking for faster, cheaper, and more efficient ways at serving you. Besides, technology keeps advancing and more technology-driven equipment emerges every day. We are always the first to use the latest tools.

4. We do more than electrical works

At Blessed Electric, we install, service, and repair generators and HVACs, in addition to electrical works. We install and repair ceiling fans. Also, you can hire us for the installation of a digital thermostat. So, our electricians do much more than electrical work.

If you’re a building contractor handling several projects, we are your best bet. Instead of hiring separate companies for your electrical works and HVAC installations, you can hire us for both.

5. Our electricians take the color test 

Color blindness is a very serious medical condition because of our line of business. In wiring, the color-coded system is used to differentiate types of wiring. Unfortunately, anybody suffering from color blindness may not be able to understand the color-coding system.

To prevent a fatal mistake, we usually ensure that none of our electricians is color blind. That’s why we subject them to the color test. It is for your safety and theirs.

6. They are great at troubleshooting 

Remember that many electrical defects are usually hidden. And every fault has numerous likely causes. So, to get to the root of electrical issues, they’ll have to examine, diagnose, and evaluate them. This is where they need their logical reasoning skills.

We have made their job a lot easier by equipping them with the latest diagnostic tools. And we are proud to say that there has never been any electrical issue that we have not been able to fix.

If you need the best licensed electrical contractors in Austin, you’re on the right website. Give us a call right away. At Blessed Electric & Air, we offer the best electrical services at competitive charges. More importantly, our turnaround time is impressive. We will solve your electrical problems faster and better than any of our competitors.