Broken AC? Here’s a Few Tips to Help Trouble Shoot!

When the scorching summer heat hits, there’s nothing more frustrating than a malfunctioning air conditioning system. A broken AC can lead to discomfort, sleepless nights, and reduced productivity. However, before you call in a professional, there are several troubleshooting steps you can take to identify and possibly fix the issue yourself. In this article, we will provide you with valuable trouble shooting tips to help you get your AC up and running again.

  1. Check the Power Source

The first step in troubleshooting a broken AC is to check the power source. Ensure that the AC unit is properly plugged in and that the power outlet is functioning correctly. Sometimes, a loose connection or a tripped circuit breaker could be the reason behind the AC’s failure to turn on.

  1. Inspect the Thermostat

A faulty thermostat can often be the culprit behind an AC malfunction. Check if the thermostat is set to the right temperature and mode. You can also try replacing the batteries in the thermostat to rule out any power-related issues.

  1. Clean or Replace Air Filters

Clogged or dirty air filters can significantly impact your AC’s performance. Check the air filters and clean them if they are dirty. If the filters are too old or damaged, consider replacing them with new ones to ensure optimal airflow.

  1. Examine the Condenser Unit

The condenser unit is located outside your home, and it plays a crucial role in the cooling process. Make sure the area around the condenser is clear of debris and obstructions. Clean the condenser coils gently with a soft brush to remove any dirt or dust buildup.

  1. Check for Refrigerant Leaks

Low refrigerant levels can lead to inefficient cooling or even complete AC failure. Look for signs of refrigerant leaks, such as hissing sounds or oily spots near the AC unit. If you suspect a refrigerant leak, it’s essential to call a professional HVAC technician to handle the issue.

  1. Test the Capacitors

Capacitors are responsible for starting the AC’s motors. If they are faulty, the AC may not start or may struggle to stay on. Use a multimeter to test the capacitors for continuity and replace them if needed.

  1. Inspect the Fan Motor

The fan motor is essential for proper airflow in the AC unit. Check if the fan motor is running smoothly. A malfunctioning fan motor may require lubrication or replacement to ensure efficient cooling.

  1. Clean the Evaporator Coils

Dirty evaporator coils can lead to reduced cooling efficiency and frost buildup. Carefully clean the coils using a soft brush and mild detergent to improve the AC’s performance.

  1. Check the Drainage System

A clogged or blocked drainage system can cause water to leak from the AC. Ensure that the drainpipes and condensate drain pan are clear of any obstructions to prevent water damage.

  1. Inspect the Compressor

The compressor is the heart of the AC system, and if it’s not functioning correctly, the cooling process will be affected. Listen for unusual noises or vibrations from the compressor and call a professional if you suspect any issues.

  1. Look for Faulty Wiring

Examine the AC unit’s wiring for any signs of damage or loose connections. Faulty wiring can lead to short circuits and pose a safety hazard. If you’re not familiar with electrical work, it’s best to leave this task to a licensed electrician.

  1. Clean the Outdoor Unit

If your AC’s outdoor unit is covered in dirt and debris, it can hinder its performance. Regularly clean the outdoor unit to prevent any obstructions and ensure efficient cooling.

  1. Consider the Age of the AC

Sometimes, a broken AC might be the result of old age and wear and tear. If your AC is more than 10-15 years old, it may be more cost-effective to replace it with a newer, energy-efficient model.

  1. Schedule Regular Maintenance

Prevention is always better than cure. To avoid unexpected AC breakdowns, schedule regular maintenance with a professional HVAC Technician!

If your unit is aged or not working properly contact Blessed Electric and Air, or call us today to schedule an appointment

214 801-5755

Troubleshoot Common HVAC Problems: Keep Your Appliances Fit and Fine

All homes in and around Arlington have at least one HVAC Irving appliance working in their homes, whether heating or cooling. Our HVAC appliances keep us comfortable and cozy during extreme weather conditions, making them significant for alleviation.

However, excessive usage and low maintenance can reduce our HVAC appliances’ working efficiency. As the owners, we should understand that our HVAC appliances may be machines but need proper care and maintenance for high working efficiency. In such cases, the best way to take care of appliances is by contacting Irving HVAC appliance services.

Common HVAC Issues and Solutions

You should call your professional technician at least twice annually to service and maintain your HVAC Irving appliance. However, it does not mean you’ll have to rely on them completely for every minor inconvenience with your system. 

HVAC appliances are machines and might face some issues. Only a few problems require professional assistance, others can be fixed with some common knowledge and basic experience. You have reached the right spot if you need a quick guide to give you all details about frequent HVAC issues with solutions. Here is all you need to know about HVAC issues and their easy solutions:

Dirty air filters

Most Round Rock HVAC professional technicians call the air filters of the HVAC system its lungs. The air in your home and the warm or cold air in the HVAC system passes through the air filters. Air filters remove pollen, bacteria, viruses, and other unwanted microorganisms to maintain the air quality of your home.

Over time, dirt and dust clog the air filters. As a result, you may notice a decline in indoor air quality. You may also notice increased seasonal allergies if your family has any. The best solution is to change your air filters at least weekly to avoid dirt accumulation.

Thermostat issues

The thermostat detects your home’s temperature and determines the ideal temperature for your comfort. It controls your HVAC appliance and ensures it works to your comfort.

However, a thermostat may also malfunction if you do not call a Dallas HVAC professional technician to maintain it. A malfunctioning thermostat will not determine your home’s ideal temperature to keep you comfortable. You should contact your technician for its annual maintenance, or you can install a smart thermostat for more convenience. 

A smart thermostat allows you to control your HVAC systems even if you are outside. It reminds you of maintenance schedules and informs you of technical issues with itself or the system.

Wear and tear damage

Excessive usage with no maintenance can force the sensitive parts of the HVAC appliances to stop working or malfunction. You can take care of malfunctioning parts like the air filters and the registers, but you should contact a professional HVAC technician for serious damage.

Your technician may ask you to replace or repair the damaged part as per the system’s condition and your requirements. You should follow their advice and do accordingly for the best results and high comfort levels.

Tripped breakers and blown fuses

In some cases, if your HVAC appliance has to work harder to keep your home at a comfortable temperature, its breaker may trip, or its fuse may blow.

Factors like dirty air filters or blocked air vents can force the system to work harder to push or suck the air, leading to excessive energy consumption. In such cases, the fuse or breaker may break the circuit to protect the sensitive parts of the appliance from high energy flow. You can replace the breaker and fuse easily or contact a professional technician.

Unwanted noise

An efficient and maintained HVAC appliance should not make much noise when operating. Ideally, an HVAC appliance makes minimal to no noise when it works to maintain the peaceful environment of the house. However, if it makes a lot of noise, you should contact a professional to check the issue.

Your appliance can make different noises, like banging, hissing, clicking, and loud thumps. Different noises indicate different issues; only a professional Arlington HVAC technician can find the real cause and fix it. However, you can also check the insides of your appliance for unwanted foreign objects like leaves and twigs that may have entered.

Foul smells

Like low noise, an efficient HVAC appliance should not ruin the atmosphere of your home by giving out a foul smell. There is no reason an HVAC appliance gives off smells like rotten eggs or still water.

You should unclog the drain pipes of your appliance as bacterial growth can induce foul smells. Also, inspect your system for dead insects, as they may be the reason for the foul smell. 

HVAC Irving  Appliances for the Win

An HVAC appliance can cause you more problems than these if you do not put it in the experienced hands of a professional technician. If you are looking for an HVAC company that excels in servicing, repairing, and replacing HVAC appliances, DFW Electrician is your perfect partner. You can contact our skilled and trained DFW HVAC technicians to handle your HVAC issues with perfectionism and professionalism.

Here are the Best Ways To Stay Cool in The Texas Heat.

Tips for staying safe in Dallas during the summer

In Texas, summers are hot.

We will see plenty of triple-digit temperatures in Dallas over the coming months. Summer temperatures are rising, so staying safe and cool is crucial.

Every year, hundreds of people die as a result of high temperatures. There are preventable causes of heat-related death and illness in the United States, yet more than 700 people are killed each year by extreme heat.

Keeping cool, staying hydrated, and staying informed are essential. Overheating can cause sickness. You can get sick when your body cannot compensate for the heat and cool you down appropriately. It is important to note that the following factors affect your body’s ability to cool itself during scorching weather:

  • An extremely high humidity level. Sweat won’t evaporate as quickly when the humidity is high. As a result, your body may be unable to release heat as fast as needed.
  • There are personal factors involved. The heat a person can handle depends on a person’s age, obesity, fever, dehydration, heart disease, mental illness, poor circulation, sunburn, and prescription drug and alcohol use.

Whenever you are working or playing outdoors, find shade and take lots of breaks. Pets and children should never be left in your car. The highest risk group is people 65 and older, children younger than two, and those suffering from chronic diseases or mental illness. You should closely monitor people who depend on you for their care. It is wonderful to bask in the sunshine, but extreme heat can be fatal for young and old, pregnant women, and those with chronic diseases. There’s no escaping the heat, both outside and inside.

Drinking water is a given, but many other ways to stay hydrated exist. Changing your bedding are no-sweat ways to stay cool this summer. You can enjoy the breeze with a bowl of ice in front of a fan if it is hot but not humid. The ice will cool you as it melts and evaporates. Cooling yourself off in the summer is as simple as spritzing yourself. Store a spray bottle in your refrigerator, and mist yourself whenever the weather gets hot. The water evaporates, and it cools you.

Whenever possible, wear thin, light-colored cotton that is loose and loose-fitting. It’s best if sweat evaporates directly from the skin to the air. There’s a strange truth about spicy foods: they’re good for cooling you off. The heat from spicy food increases blood circulation, which leads to sweating. Furthermore, sweating cools you down after it cools down.

Heat-related illnesses can be prevented by following these precautions:

  • Aim to stay out of direct sunlight and in the shade
  • During the day, limit outdoor activities between 10 a.m. to 4 p.m. since these are the hottest hours
  • Dress in light colors and lightweight materials to get into gear
  • Stay hydrated and drink lots of water
  • Use sunscreen with a high SPF as often as possible
  • Eat light meals to feel cooler
  • Wipe your forehead with a cool cloth
  • Avoid using your stove or oven if possible
  • Turn on a Window Fan at Night
  • Whenever possible, stay in an air-conditioned indoor location.

If you are experiencing any electrical problems in your homes then visit Blessed Electric today for an expert to come out and help with any service needed!

Pool Safety, What You need to Know to Be Safe

Having fun in the sun is made more accessible by warm weather. The most popular summertime activity is a day at the pool with friends and family. To keep everyone safe, take a few simple steps for pool safety. Swimming pools and spas require you to ensure everyone’s safety, especially children. Safety devices must be installed, and proper water safety behaviors must be observed. In addition to installing pool and spa fences, the Consumer Product Safety Commission (CPSC) suggests ensuring children know how to swim. Combining these safety strategies protects adults and children in and around water.

Read these safety tips to keep your family and friends safe:

  1. If your child is near a pool or spa, watch them closely. When more than one adult is present, designate one of them to protect the children for a specified time and then rotate. By using this method, lapses in supervision will be prevented.
  2. Keep children safe in the water and enroll them in swim lessons.
  3. Don’t allow children to play near pool drains, pipes, or other openings to avoid getting entangled.
  4. Keep your children from relying on toys such as water wings or noodles to keep them safe. Consider fitting your child with a personal floatation device (PFD) if they cannot swim.
  5. Always keep these items close to you while using a pool or spa: a portable telephone, a first aid kit, a flotation device, and scissors if you need to cut hair, clothing, or a pool cover.
  6. If a child goes missing, look for them in the spa or pool first.
  7. Ensure your family, friends, and neighbors know safety instructions.
  8. Become a proficient swimmer and teach your child the same.
  9. Become proficient in CPR on children and adults, and keep your skills updated.
  10. A five-foot or higher fence should surround your pool, and gates should be self-closing and self-latching.
  11. Spas should be equipped with lockable safety covers.
  12. Door alarms can serve as a fourth fence around a pool if your house is the fourth wall. On windows facing pools or spas, install window guards for additional protection.
  13. Make sure you have pool and gate alarms installed so you will know when your children go near the water.
  14. Ask your pool service provider if you need to know if your pool or spa has compliant drain covers.
  15. It is essential to keep your pool or spa cover in good condition. Whenever you notice defects, have them repaired if possible or replace them.

Here at Blessed Electric and Air, we aim to make your home operate smoothly. Our basic times of operation span from Monday through Friday, 8 AM-7 PM, and Saturday from 8 AM-1 PM. Anytime after those hours will be looked at as an EMERGENCY SERVICE CALL. No matter how many services are performed, rates and charges go up.

DFW Electrician, Is It Time to Hire One?

Why it may be time to hire a DFW electrician 

Do you have any experience with electricity-related problems at home? How did you resolve the issue? Have you searched Google or watched a YouTube video and tried to fix the problem yourself, OR have you called a licensed electrician? One thing for sure about electricity, it is that it is always challenging. Therefore, I want to issue a warning to those who are considering DIY electrical work. Attempting to solve an electrical issue is dangerous, and it can cause you to burn your fingers and even be lethal if you don’t have the knowledge and experience.

Furthermore, electrical DIYs are illegal and can jeopardize insurance claims since they can cause fires, leading to more extensive property damage. In the event of an electrical problem, what should you do? First, you should contact a licensed DFW electrician. With their advanced training and equipment, they will protect you from danger, tackle risky tasks, and save you from further problems. Professional electricians need at least four years of apprenticeship training before becoming licensed. That’s hours and hours of electrical experience. Besides that, they must also hold a license in the DFW area or the city where they work. You can learn more about what professional electricians can do here. Homeowner needs to understand when to call in an expert electrician near them when they see red flags. The following warning signs indicate that you need to hire an electrician:

Circuit breakers are frequently tripping.

A tripped circuit breaker is fine if it just happens now and then. Still, a tripped circuit breaker is another story if it keeps tripping. A shortage in wiring or too many high-power devices is usually responsible for overloading. In any case, you’ll need a licensed DFW electrician to upgrade the circuit breaker or repair some wiring. Ignoring this warning may result in an electrical fire!

Burnt smell that cannot be identified

If you can’t find the source of that persistent burning smell in one of your rooms, it’s coming from behind the walls. Various factors, including old wiring or short circuits, could cause this. If you can identify the unusual smell and trace it to an electrical outlet or fuse box, turn off the power immediately and call a professional. Furthermore, you notice any discoloration in your outlets besides the smell. In that case, burning behind your walls results in sparks or small fires. Again, it doesn’t matter whether you can identify the source; a burnt smell indicates the possibility of a fire igniting at any moment.

The main service panel shows signs of deterioration

The main service panel is the heart of your home’s electricity system. Any signs of deterioration or visible wear and tear, like rust, should prompt you to call your trusted electrician. The technician will be able to determine if your service panel requires repair or replacement.

The use of extension cords is excessive.

It is not recommended to use extension cords for an extended period. Having multiple extension cords, plugging them into power strips, or making them a permanent fixture in your rooms indicates that you need more outlets. Your family’s needs should select a room’s outlets. In areas where outlets are lacking, a licensed DFW electrician can install them. You will be able to provide additional outlets to your family and improve safety.

The outlet is hot or warm to the touch.

An outlet that is hot or warm is not a good sign. There is an overload in this case, or the wiring is bad. If you plug a device into an outlet, it will get warm only then. To properly assess the problem, you will need to call a DFW electrician.

Your house is old

Suppose you own a house built more than twenty years ago. It is, therefore, necessary to upgrade the electrical system. Your home was built with electrical standards that changed over time.

A flickering dimming light bulb or a light bulb that does not last

The LED light is terrific and energy-efficient and lasts longer than conventional lights. However, if your bulbs don’t last or are flickering, your socket or circuit might be the problem. Light bulbs can always be replaced, but that’s a temporary solution. To identify and solve the problem, you should call an electrician.

Are you moving to a new home?

You have just purchased your first home! Congratulations! However, before you move in or sign any paperwork, let a licensed DFW electrician inspect your home’s electrical system. In order to prevent any potential problems before moving into your new home, you can hire an electrician to assess your property and make recommendations, as well as repair or replace what is necessary. Therefore, your family is guaranteed to be safe.

You are frequently shocked (even by minor shocks).

When you turn on a light switch, do you get shocked? In most cases, electrical shocks will not cause pain immediately, but it’s important not to ignore them. It means that electricity is escaping from your circuit. There is also a possibility that it will escalate into a fire. So turn off the switch and call your electrician immediately rather than investigating the probable cause.

A rodent chews on a wire.

When rodents chew on your wiring, they can cause an electrical fire or system failure. Call in an electrician to assess the damage and provide a solution in addition to fixing your rodent problem (Call pest control!).

A sparking outlet

The sparking of outlets indicates electricity problems. Many reasons can cause the spark, including short circuits, negligence, water exposure, and old outlets. But first, make sure a certified electrician resolves the issue.

Electricity-related installations or repairs

You should never DIY anything related to electricity (except maybe changing a light bulb). It seems easy to watch YouTube videos, but installations are serious. Examples of these installations or repairs include:

  • Installing an electrical outlet.
  • Installing an intelligent home system.
  • Installing a new ceiling fan.
  • Repairing a light fixture.
  • Remodeling the home.
  • Installing whole-house surge protection.
  • Installing pool lighting.
  • Installing an electrical panel.

It may seem like you’re saving a few bucks, but in reality, you are making a risky move that could endanger your family. Moreover, it is illegal and non-compliant with building codes.

If you have any questions about electricity

If there’s anything you think should be added, don’t hesitate to contact the professionals in Round Rock. As a non-electrician, you are not qualified to handle possible electrical problems. Never wait; it is better to be safe than risk your life. In this modern age, we cannot survive without electricity, which is very useful. The dangers and complexity of electricity are relatively easy to overlook. Death and severe injury are possible as a result of it. Simple mistakes can have serious consequences.

To avoid electrical hazards, consult an electrician. Trust the professionals to keep your family safe. If you plan on hiring an electrician, ensure they have a valid license and ask for their specialty (i.e., if they specialize in residential homes). Remember to ask if they have liability insurance and a warranty when you set up a project.

Here at Blessed Electric and Air, we aim to make your home operate smoothly. Our basic times of operation span from Monday through Friday, 8 AM-7 PM, and Saturday from 8 AM-1 PM. Anytime after those hours will be looked at as an EMERGENCY SERVICE CALL. No matter how many services are performed, rates and charges go up.

Irving Texas, Several Things an Electrician Can Help you with!

Keeping your home’s electrical system efficient is essential. We recommend having a team of highly qualified technicians in Irving on standby for your home to run at its best. A home’s electrical service affects almost every system and shouldn’t be tampered with.

Upgrades to Electrical Systems 

Keeping your electrical system safe and efficient may require upgrades if you live in an older home. Also as a result of upgrading your home, you can add more outlets and lastly improve how electricity flows throughout your house. In addition, the cost of your electric bill can be dramatically reduced by replacing your wiring and breaker box.

Installing, Maintaining, Repairing, and Replacing Electrical equipment

Our primary services in the Irving electrician Tx area include installation, maintenance, repair, and replacement. Our professionals can perform these types of electrical services on any system in your home. It is essential to keep your home running smoothly at all times. Work they can do includes Outlet switches, appliances, ceiling fans, indoor or outdoor lighting, electrical installations, electrical repairs, and electrical maintenance.

Correcting and inspecting codes

Always hire a licensed Irving electrician to ensure that all local building codes are met with an electrical inspection when upgrading or adding an appliance. In addition, a building inspector must approve any electrical work you have done on your home to prove it complies with safety standards.

 A Surge Protector

Sometimes the problem with your home’s electrical system is inadequate surge protection. Surge protection for your entire home will ensure that all your electronic devices, lighting, and other power-dependent items remain powered.

Breaker Panels & Circuit Breakers

If you require circuit breaker repair or panel replacement, you want to avoid taking a chance with an inexperienced technician. As a team, we have qualified Irving electricians on hand to complete the job efficiently.

A Generator

Generators are a must-have when there is a chance of severe weather or a power outage. Occasionally, weather-related power outages can occur here in Irving, Texas. But no matter what happens to your electricity, a quality generator will keep you and your family cool and cozy. No matter what type of generator you have, our technicians can repair, replace, or maintain it.

Lighting for the Outdoors

Adding outdoor lighting to your home or family can provide protection and efficiency for outdoor activities. Our electrical technicians can install or repair your outdoor lighting to ensure it operates when needed. We can also install security and dusk-to-dawn lights for Irving, Texas homes.

How to Choose the Best Electrician 

To find the best electrician in the Irving, Texas, area, you should speak with friends and family who can provide feedback based on their experiences, read customer reviews, and check with the BBB to see if they have complaints against the company. The best thing to do is to have an electrician estimate the amount of work needed at your home.

What makes an Irving, Texas, electrician a good choice?

We assure you will receive the highest level of service and workmanship from us. Providing guaranteed electrical work is what we do.

What are the signs that I should call an electrician?

If you notice that your appliances don’t work correctly or that the electricity in your home fluctuates, you should contact an electrician. Having an electrician check your system once a year is essential for ensuring everything is working correctly.

Are electrical repairs something I am capable of doing myself?

It is never recommended that homeowners do their electrical repairs. However, to ensure your family’s safety and compliance with the code, an experienced and licensed technician should perform all electrical services.

Remember our Motto, “Don’t Stress, Call Blessed” Call Blessed Electric and Air so an experienced electrician can help you today!

HVAC Cleaning, Spring time cleaning!

Here are some critical HVAC maintenance tasks you shouldn’t forget

The spring season is a time for new beginnings, which includes HVAC Cleaning and your home from top to bottom. How come? When you neglect your unit’s maintenance, it could lose efficiency and have a shorter lifespan. For your HVAC system to run all season smoothly long, you should perform these six tasks as part of your seasonal routine.

Ensure your air filters are clean and replace them as necessary

Regularly checking and replacing your air filter are essential things you can do to maintain your Irving HVAC system. A dirty or clogged air filter reduces airflow. It makes your system work harder to circulate air, decreasing efficiency and increasing energy costs.

We recommend that you change your air filter every three months. Still, you may need to do so more frequently or less frequently, depending on the type of filter that you have and the environment in which you live.

HVAC Cleaning is essential for your unit to work efficiently for your home.

Make sure your vents and registers are clean.

A spring cleaning checklist should also include cleaning the vents and registers in your home. As dust and debris accumulate, they block airflow, making your system work harder.

Keeping your vents and registers clean is as simple as removing them from the wall or floor and vacuuming away dirt and debris. You may have to wash them with soap and water depending on how dirty they are.

Make sure your ductwork is in good shape.

Aside from cleaning your vents and registers, ensure your ductwork is free of leaks or other damage. A leaky ductwork system can reduce your system’s efficiency and introduce harmful pollutants into your home.

A professional Dallas HVAC contractor can inspect and repair your ductwork if you suspect a problem.
Make sure your outdoor unit is clean.

In addition to the indoor components of your Irving HVAC system, you should also take care of the outdoor unit.

Clean the area around the unit by removing any leaves, twigs, and accumulated dirt. Then, use a garden hose to spray down the unit and remove any grime that has built up. Before cleaning the unit, make sure it is disconnected from power!

Make sure your thermostat is working.

It would help to have a properly functioning thermostat to ensure your HVAC system works properly. Your thermostat can cause significant problems when it is outdated or not functioning correctly, such as decreased efficiency and uneven temperatures.

Get a professional Dallas HVAC contractor to check and replace your thermostat if it isn’t functioning correctly. You can even control the temperature in your home with a smartphone app on some newer models.

Get your HVAC system inspected by a professional

Last but not least, you should schedule a professional inspection of your HVAC system once a year call Blessed Electric to have a professional have a look. When you have a professional review done, they will identify potential problems before they become major repair issues, saving you time and money. During this time, duct cleaning is also a great way to remove debris, dust, and pollutants.

Generators, And Their Overall Benefits

There are several benefits to owning and using a whole-home generator for your home and family, including:

Power backup: Your generator will supply electricity to your home within seconds of a power outage.

The generator will start up automatically, so there’s no need to start it and connect it.

  • You can start your generator automatically with an automatic transfer switch safety.

Providing year-round comfort: A whole-home generator can power all essential appliances, including heaters, air conditioners, refrigerators, freezers, electric stoves, lights, TVs, emergency radios, and more.

Additionally, a standby generator can be fueled permanently from municipal natural gas lines, large propane tanks, or large diesel tanks, which reduces the necessity for manual refueling during lousy weather.

  • Unlike portable generators that frequently leak carbon monoxide, it requires no electrical wiring.

Replacement of a whole-house generator 

  • A whole-home generator, as with any piece of equipment with an engine, will eventually require replacement. Suppose your generator reaches the end of its service life. A breakdown may occur more frequently, engine problems may occur, or large loads may not run smoothly.
  • In an emergency, a generator replacement will ensure you have the backup power you need without worrying about breakdowns, power outages, or safety concerns. Contact Blessed Electric and Air today for a free quote and estimate today! Depending on your needs, we can recommend the best model for you and provide complete installation services.

If your generators need a repair, look for these signs

  • If you notice any of these problems with your standby generator, please call our experts:
    • A weak battery, fuel delivery issues, faulty ignition systems, or faulty starters can cause start-up problems.
    • A bogging engine results from a restricted fuel system, dirty air filter, weak spark, or an old engine.
    • The engine can stall with low oil levels, lousy fuel, overloading, or a faulty ignition system.
    • A generator that doesn’t produce power may have a faulty transfer switch, tripped breakers, or a defective power head.

Why You Shouldn’t Do Your Own Electric Work

Many homeowners get excited to make the trip to the home improvement store, research some DIY tutorials on YouTubeTM, and roll up their sleeves to make their dream home come true due to the popularity of Do It Yourself (DIY) home improvement shows. Home improvement projects that include electrical work are rarely a positive experience for DIYers since DIY electrical work is never a good idea. The following are some reasons why:

  • Electrical DIY Can Be Dangerous
  • Performing electrical work wrong can result in electrocution of yourself or others within your home, which can be fatal. Suppose faulty wiring is combined with combustible materials like wood and drywall. In that case, severe fires can endanger you, your family, and your neighbors.
  • The long-term costs may exceed the short-term benefits
  • We commonly receive calls and emails from customers who have started a DIY electrical project to save money, only to run into problems. Licensed electricians will need to remove the incorrect wiring before troubleshooting begins. As a result, the project can take longer (and cost more) than it usually would.
  • DIY electrical does not comply with the electrical code
  • Electrical work is subject to stringent regulations. Our electricians are highly trained and knowledgeable about NFPA 70® and National Electrical Code® (NEC®). We consistently receive praise from inspectors about the quality of our work. In the future, if your DIY electrical work does not meet current electrical codes, you may have problems reselling your home and will not be able to get homeowner’s insurance.

It’s Dangerous to Do It Yourself

Electric systems are costly and dangerous to attempt to DIY. It is different for every DIY project. One of the most significant risks of DIY electrical projects is overheating circuits and catching fire. There is a possibility that circuit overheating, sparks, and fires can result from faulty connections, wire gauges, and other amateur mistakes.

Here’s the good news –Blessed Electric can help! No matter your electrical project size, we can provide you with a quote.

Are Your Breakers Protecting You!?

By: Blessed Electric and Air

Are you familiar with your breaker’s location? Most of us don’t think about it until our lights go out, and we must scramble to find it. Breakers, or electrical panels, distribute electricity throughout the home. Electrical wiring is connected to your home’s internal wiring through these connectors. Circuit breakers and fuses are designed to trip before circuit wires become dangerously hot. Your appliances and power sources may not work as a result.

The tripped circuit keeps your house safe by protecting the electrical wiring in your house when you use the toaster and microwave at the same time.

Electrical loads you send through your walls, not the number of appliances you have, make the power go out. If your circuit breaker trips or keeps tripping, there may be a problem with your home’s wiring.

That’s why it’s crucial to keep your systems up-to-date and secure or to upgrade them if necessary. Circuit breakers can be found in the following types:

  • Standard Breaker– The electrical flow is monitored from when the electricity enters the home to when it leaves through appliances and outlets.
  • GFCI Breaker– When an overload trips GFCI (Ground Fault Circuit Interrupter) breakers, the power to the circuit is cut off.
  • AFCI Breaker– Electric discharges in cords or wiring can cause fires if they are not protected by AFCI breakers (Arc Fault Circuit Interrupters). These breakers immediately disconnect the damaged circuit when the arc builds up enough heat.

Contact us if your breakers need special attention. Blessed Electric and Air.