Choosing the Right Electrical Panel for Your Home: Factors to Consider

An electric panel is a crucial component of any building’s electrical system. It distributes electricity throughout the system and ensures that each circuit receives accurate power. The panel contains circuit breakers that protect the circuits from overloading and causing a fire.

However, installing a faulty or improper electric panel can be extremely dangerous. A faulty panel can cause electrical fires, electrocution, and even death. The consequences of a faulty panel are not to be taken lightly. If you are in Irving and need electrical panel installation or repair, choosing a licensed and experienced electrician is important.

Factors to consider while choosing the right electrical panel

Do you want to avoid experiencing frequent electrical issues in your home or office? It’s time to choose the right electrical panel! Here are some factors that will help to choose the right electrical panel:

Amperage rating: Article 409 of the­ National Electrical Code (NEC) states that e­very electric pane­l should bear a label indicating its short-circuit current rating (SCCR). This rating indicates the highest level of short-circuit current that the panel can handle without causing harm to its components or starting a fire. 

Generally, a 100-amp main is suitable for most households, but some builders now install <150-amp or 200-amp services to ensure sufficient capacity. However, in Round Rock and other regions, electricians avoid using electrical panels rated at 60 amps or less because they are inadequate for modern needs.

Voltage rating: The voltage rating of an electric panel is typically determined by the maximum voltage of the electrical system it is serving. In Dallas, Texas, and other states, the electricians use the standard nominal and preferred standard nominal voltages for 60 Hz power systems are listed in ANSI C84.1. For residential homes with single-phase service, the voltage rating is typically 120/240 volts, with some rated at 125/250 volts.

Number of circuits: The number of circuits in an electrical panel refers to the number of individual electrical circuits that can be connected to the panel. The specific number of circuits can vary depending on the size and capacity of the panel, as well as the electrical needs of the home or building. However, in DFW and other regions, electricians use the commonly used panel typically has around 20 to 60 circuits.

Enclosure type: The enclosure type in an electrical panel refers to the housing type containing the electrical components and wiring. The most commonly used enclosure type for electrical panels is NEMA 1, a standard type that provides basic protection against dust, dirt, and accidental contact with the live components.

Material of construction: The material of construction used in electrical panels is typically metal, such as steel or aluminum. The pane­l’s durability and resistance against heat and e­lectrical currents largely de­pend on the chosen mate­rials. Steel remains a top conte­nder for larger panels, while­ aluminum is an excellent option for smalle­r or lightweight ones. In Dallas and nearby regions, an electrician can suggest which panel is best. 

Type of circuit breakers: An ele­ctrical panel typically holds various types of circuit breake­rs, including standard, AFCI, and GFCI variants. Among these, the most commonly used models, alongside conventional ones, are AFCI and GFCI circuit breake­rs.

AFCI (Arc Fault Circuit Interrupter) circuit breakers are designed to detect and prevent electrical arcs, which can occur when a loose or damaged wire is in your home’s electrical system. However, GFCI (Ground Fault Circuit Interrupter) circuit breakers are designed to protect against electrical shock in areas where water may be present, such as bathrooms and kitchens. 

Choosing between them depends upon your preference, and if you live in Arlington or surrounding areas, it is best to consult an electrician.

Grounding system: The type of grounding system used in an electrical panel is typically a grounding electrode conductor (GEC) that connects the electrical panel to a grounding electrode, such as a metal water pipe or a grounding rod. The purpose of grounding is to provide a path of less resistance for electrical current to flow in a fault or surge, which helps protect people and equipment from electrical shock or damage.

It plays a crucial role in choosing the panel, as it must be compatible with the grounding system to ensure proper functioning. The panel must have a grounding bar and accommodate the required number and size of grounding wires.

Bottom line:

When it come­s to choosing the right electrical pane­l for your home, there are­ several considerations to ke­ep in mind, such as the size of your home­, power requireme­nts, and budget.

By investing in a high-quality ele­ctrical panel, you can rest assured that the home­’s electrical system is powe­red by a safe and reliable­ source. In Dallas and surrounding regions, Blessed Electric and Air Electricians can help make a well-informed decision. Contact our experts at (214)801-5755 or visit our website today!

The Importance of Electrical Maintenance for Commercial Properties

Electricity is important to power the lights brightening our homes and the devices that connect us with everyone. However, this vital resource often requires careful use and implementation. 

That said when it comes to commercial properties, a safe and dependable electrical system can help ensure the smooth operation of daily tasks. That’s why ensuring proper electrical maintenance for commercial properties is important.

This article will explore why a safe and dependable electrical system can ensure every building’s infrastructure. 

Why is Electrical Maintenance Necessary for Commercial Properties?

Commercial property owners and managers understand the need to maintain reliable and secure electrical systems. As a result, they conduct routine electrical maintenance on the properties. Some reasons why conducting regular electrical repair is essential are provided below:

Avoiding Accidents and Mishaps

The reliability of the building’s electrical systems is crucial to its day-to-day operations. Maintaining all of the machinery, appliances, and power outlets at your place of work is essential to avoid accidents and keep everything running smoothly and safely. Our Irving Electrician business maintenance services will also help your electrical appliances last longer.

Preserving Your Stuff

As a commercial building manager, you are responsible for the safety of the building, including workers, customers, or tenants. 

Major safety hazards, such as electrical fires, may result from faults with your electrical system. Although these hazards may be seemingly minor, they can still harm your electrical appliances such as TV, fridge, etc. Proper electrical maintenance helps keep the troubles at bay and preserve your stuff for years.

Curbing Major Electrical Issues

There might be severe issues with the electrical system in your commercial property, even though everything seems to be running well. At Round Rock Electrician, we provide exceptional electrical maintenance services to spot minor faults before they escalate into big disasters. 

Your Property’s Energy Bills May Go Down as a Result

One of the primary benefits of regular electrical maintenance is that it allows our expert electricians to detect and fix any minor issues. Various problems can affect your electrical equipment, some of which may not be apparent. 

These issues can cause your equipment to use more energy than necessary. It results in higher energy bills and potential breakdowns. With regular electrical maintenance, we can identify and resolve these problems to ensure your equipment is functioning efficiently and effectively. 

Major Electrical Problems Are Avoided

Although your electrical system may appear to be running smoothly, there could be underlying issues that seriously threaten the safety of your building’s occupants. That’s why it’s essential to have regular maintenance checks and comprehensive inspections carried out by licensed professionals such as Arlington Electricians.

These inspections can detect potential problems early on to allow troubleshooting before they escalate into major safety hazards. You can ensure the safety and welfare of everyone in your building by identifying and resolving these issues early.

Avoid Future Repair Costs and Save Money

When you own a company or commercial building, spending money on electrical system upkeep seems irresponsible if everything is running well.

Remember that the goal of our Dallas Electrician business electrical repair services is to save costs for you. Keeping up with routine maintenance may help you reduce the number of costly repairs to your electrical system.

Final Verdict!

A company’s best efficient way to function is to have a comprehensive electrical maintenance plan. The risk of fire and electrical shock caused by faulty electrical equipment may be reduced and eliminated with the help of a preventive maintenance program.

The repair and labor costs alone for a commercial electrical emergency may easily run into thousands of dollars, not to mention the disruption to corporate operations. Hence hiring professional and reliable Commercial Electrical maintenance services like DFW Electrician are essential to avoid all business and property loss. Contact us for the best Commercial Electrical maintenance service!

Why You Shouldn’t Do Your Own Electric Work

Many homeowners get excited to make the trip to the home improvement store, research some DIY tutorials on YouTubeTM, and roll up their sleeves to make their dream home come true due to the popularity of Do It Yourself (DIY) home improvement shows. Home improvement projects that include electrical work are rarely a positive experience for DIYers since DIY electrical work is never a good idea. The following are some reasons why:

  • Electrical DIY Can Be Dangerous
  • Performing electrical work wrong can result in electrocution of yourself or others within your home, which can be fatal. Suppose faulty wiring is combined with combustible materials like wood and drywall. In that case, severe fires can endanger you, your family, and your neighbors.
  • The long-term costs may exceed the short-term benefits
  • We commonly receive calls and emails from customers who have started a DIY electrical project to save money, only to run into problems. Licensed electricians will need to remove the incorrect wiring before troubleshooting begins. As a result, the project can take longer (and cost more) than it usually would.
  • DIY electrical does not comply with the electrical code
  • Electrical work is subject to stringent regulations. Our electricians are highly trained and knowledgeable about NFPA 70® and National Electrical Code® (NEC®). We consistently receive praise from inspectors about the quality of our work. In the future, if your DIY electrical work does not meet current electrical codes, you may have problems reselling your home and will not be able to get homeowner’s insurance.

It’s Dangerous to Do It Yourself

Electric systems are costly and dangerous to attempt to DIY. It is different for every DIY project. One of the most significant risks of DIY electrical projects is overheating circuits and catching fire. There is a possibility that circuit overheating, sparks, and fires can result from faulty connections, wire gauges, and other amateur mistakes.

Here’s the good news –Blessed Electric can help! No matter your electrical project size, we can provide you with a quote.

Why Choose Blessed Electric for All Your Electrical Service Needs in Dallas?

There are numerous Dallas electricians and more will emerge, but the qualities of their services vary as well as their charges. Unfortunately, higher charges do not always mean higher quality of electrical service. That means you could pay higher for lower-quality electrical services. This is why you should not select any Dallas electrician at random.

The go-to Dallas electrician and Dallas HVAC specialist is Blessed Electric. If you want the best electrical services at highly competitive rates, look no further than this electrician. Here are some of the reasons why Blessed Electric is your best bet for residential and commercial electrical jobs.

Blessed Electric is Licensed

Here in Texas, it is a crime to hire an electrician that is yet to get an operational license. The hirer is as guilty as the technician. If you don’t want to get into trouble with the law, stick with a licensed electrician. In addition, being licensed is an indication of competence. Getting a license in Texas is a long, tedious process.

Electricians are subjected to different levels of assessments and scrutiny before getting approved. So, any electrician that has a license to operate in Texas must be competent. This is why we are glad to let you know that Blessed Electric got its operational license several years ago.

We are fully insured

Another reason to consider us is our insurance status. Blessed Electric and all our servicemen are fully insured. That gives a certain level of peace of mind. If an accident happens while we are serving you, our insurance company will foot the medical bills, and not you. However, we must state clearly that an accident has never occurred to any of our electricians because we follow the highest safety standards. Notwithstanding, the possibility of an accident cannot be ruled out completely.

We offer 24-hour electrical services

At Blessed Electric, we believe that every electrical fault is an emergency. That’s why we are available 24 hours a day, 7 days a week, and 365 days year. We never go on holidays. Rather, our men are always on standby, ready to respond to your calls. We prefer to avert or solve any electrical problem that could mar your holiday fun. Have you ever wondered how you’ll feel if your HVAC suddenly packs up on Friday night and you’ll have to wait till Monday to get it fixed?

It means you have to cope with the fault all through Saturday and Sunday. To avoid such situation, pitch your tent with Blessed Electric. We are always available to serve you. We will respond to your call even in the night.

Our turnaround time is impressive

One of the key performance indices of electricians is speed of service. At Blessed Electric, we don’t only offer services, but we also offer it as quickly as possible. The timer begins immediately after assigning your job to one of our electricians. That’s why our team of electricians will reach your property as quickly as possible. If it takes other electricians 2 hours to solve a problem, you can be sure that it will take us less than that.

Experience is on our side

Having served Dallas and several other cities in Texas for several years, we can proudly say we have the experience to give you the best electrical services. It is needless to remind you that experience always goes around hand in hand with expertise. As our experience increases, so does our expertise. That’s why we can assure you of the best services. If we have to handle an electrical problem twice, the bill for the second service will be on us, and not you. It might also interest you that we are familiar with electrical codes all over Dallas and other cities in Texas.

We make use of sophisticated equipment

Experience alone is not enough to give you the highest-quality services. We also need the right tools to get the job done. That’s why we spare no expense when it comes to the purchase of state-of-the-art equipment. We use technology-driven tools to troubleshoot electrical faults. That’s why there’s no fault we can’t handle. No job is too big for Blessed Electrical.

Honesty is our hallmark

It took Blessed Electric several years to build our reputation. We guard it jealously. We don’t cut corners or engage in sharp practices. You’ll never get any hidden fees from us. Once we give you a free quote, we’ll stick to it. Unlike some bad eggs among Dallas electricians, we won’t trick you into buying what you don’t need. In addition, we are always looking for the most cost-effective solutions for our clients.

Finally, we offer highly competitive rates. Do you have any electrical faults on your property? Do you need electrical installations? Or are you planning to replace or repair your HVAC? We will be glad to handle the job. For more information about our services, you can contact us today.

The Various Types of Ceiling Fans Your Electrical Service Installs

It is necessary to have ceiling fans at home even if there’s a powerful HVAC unit in your home. This is because the ceiling fans help to cut down your power consumption. When the weather is not too hot, you can shut down your air conditioning unit while your fans kick in. It is needless to remind you that fans don’t consume half as much as your HVAC unit consumes. Check types of ceiling fans for your Electrical Service Installs.

While you may want to install your ceiling fans yourself, it is better to hire a Dallas electrician, an Irving electrician, or a Round Rock electrician, depending on where you live. They understand the safety precautions around fans. For instance, they know that the blades of the fan must be at least 7 feet off the ground. At the same time, if the fans are too far away from the ground, the people underneath may not feel the impact. This is why you should let a professional handle the installation.

Now that you understand the importance of ceiling fans in homes, let’s talk about the types of ceiling fans that electricians install.


1. Dual-Motor Ceiling Fans

This is different from other fans. It comes as a pair of small ceiling fans being controlled by a single motor. It’s like getting two fans at the price of one. It might also interest you that each of the fans has its separate control. So, they can run at different speed. If you don’t want high speed, you can set the speed of the fan that blows your part of the room to low speed without disturbing others.

In addition, since each of them will cover different areas in the room, their coverage is widened. Some of them come with lights while others don’t.

2. Standard Ceiling Fans

This is the commonest type of ceiling fans found in homes. The ceiling fans are often installed with downrods. The downrod is the metal pipe that links the mounting brackets to the motor housing that spins the blades. These fans usually have about 4 to 5 blades. And some of them come with a light kit. Here is a little guide that will help you determine the length of the downrods of your ceiling fans. It depends solely on how high your ceiling is.

  • Choose a 6-inch downrod for a 9-feet-high ceiling.
  • Choose a 12-inch downrod for a 10-feet-high ceiling.
  • Choose a 24-inch downrod for a 12-feet-high ceiling.
  • Choose a 36-inch downrod for a 14-feet-high ceiling.
  • Choose a 48-inch downrod for a 16-feet-high ceiling.
  • Choose a 60-inch downrod for an 18-feet-high ceiling.
  • Choose a 72-inch downrod for a 20-feet-high ceiling.

3. Energy Star Ceiling Fans

These fans are known for conserving energy. They consume the least energy among ceiling fans. They’ll help you reduce your power consumption. In fact, Energy Star fans consume about 20-30% less power than other ceiling fans. The implication is that these fans can help you cut down up to 30% of power consumption. And the best part is that they come in standard and low-profile variants. Some of the fans also have LED lights.

4. Low-Profile Ceiling Fans

This type of ceiling fans is known as the hugger fans because they are installed as flush-mount fans. They do not require any downrod. This type of fan is ideal for apartments whose ceilings are lying low. You can choose it for an apartment whose ceiling is 8 feet high or less. Just like the standard ceiling fans, you can get hugger fans in various styles, colors, and finishes. So, you should be able to pick the one the suits your décor.

5. Smart Ceiling Fans

As their name implies, they are fans that can be linked to your existing Ecobee, Nest, Samsung SmartThings, Amazon Alexa, or Google Assistant technology. You will be able to control the fans remotely. You can even program the fans to go off the moment they no longer sense any movement. That way, no fan will work when there’s no one in its compartment.

The two major advantages of smart ceiling fans are the convenience of remote controlling and a huge slash in power consumption. You can get various sizes, brands, styles, and colors of smart ceiling fans. They can be installed by Dallas HVAC, Irving HVAC, or Round rock HVAC specialists.

6. Outdoor Ceiling Fans

All the fans described above are meant for only indoor use. They are not designed to work amid a heavy wind or humidity. So, you can’t install them in your patio or somewhere in your yard. However, there are fans designed specifically for that purpose. They are the outdoor ceiling fans, and they can withstand the wind, humidity, and inclement weather conditions. You can hire a Round Rock, Irving, or Dallas electrician to install them in your patio or anywhere around your home.

7. Industrial Ceiling Fans

These are powerful ceiling fans used in industrial buildings with high ceilings. These fans are too noisy to be installed in homes, and they consume more energy than other ceiling fans. In addition, they come with long downrods. The good part is that industrial fans are more efficient, rugged, and durable. They work like beasts. They are the ideal choice for warehouses, large stores, gymnasiums, and other industrial spaces.


When you alternate your HVAC/air conditioning unit with your ceiling or when you use the fans in tandem with your HVAC, you’ll not only cud down your power consumption tremendously, but you’ll also extend the lifespan of your HVAC as nothing wears the unit out like a heavy usage. And to get the best performance from your fans, hire a Round Rock, Irving, or Dallas electrician to install them for you.

The One Electrical Contractor Full Electrical Care Services

Every home needs the services of an electrical contractor and your choice of electrical care services depends on your location. People in Dallas will search for Dallas electricians, while people living in Arlington will need the services of Arlington electricians. Just the same way, Round Rock residents need Round Rock electricians.

That’s why it is smarter to choose an electrical contractor that has a presence in multiple cities in Texas. Blessed Electric and Air makes the difference. The company serves Dallas, Irving, Round Rock, Arlington, Austin, Canyon Lake, Cedar Park, Carrolton, Pflugerville, Fort Worth, Georgetown, New Braunfels, San Marcos, Plano, and Burleson.

Of course, there are different types of electricians and their jobs are different. Some electricians specialize on wiring and the installation of electrical equipment. And other electricians handle HVACs. In addition, you may have to look for another set of technicians for your generator. Isn’t it more convenient for you to get a single electrical contractor that can handle all these electrical services? Blessed Electric can handle them all. Here are the services we offer at Blessed Electric.

HVAC Services:

We install, troubleshoot, and repair residential, commercial, and industrial HVAC units. And you can count on us for 24-hour HVAC emergency services. If your HVAC unit packs up in the middle of the night, hit us up and we’ll be heading over to your place. So, instead of searching for a Dallas HVAC specialist, an Arlington HVAC electrician, or a Round Rock HVAC service provider, all you need is Blessed Electric and Air.

Electrical Care Services:

This same Electrical contractor offers full residential, commercial, and industrial electrical services. Here are the lists of electrical services we offer.

Residential electrical services:

  • Residential surge protection
  • Residential digital thermostat installation
  • Residential baseboard heating installation
  • Residential electrical panel upgrades
  • Residential lighting upgrades and electrical repairs
  • Residential installation of ceiling fans

Commercial electrical services:

  • Commercial electrical repairs
  • Commercial ceiling fan installation services
  • Commercial electrical repairs
  • Comercial lighting installation
  • Commercial surge protection services

Industrial electrical services:

  • Industrial lighting upgrades
  • Industrial surge protection
  • Industrial installation of ceiling fans
  • Industrial digital thermostat installation


Generator Repair Services:

It might also interest you to know that Blessed Electric also offers generator installation, repair, and installation services. If your backup generator disappoints you when you need it most, contact our team. We’ll come over to find out the problem and fix it as quickly as possible. In addition, we also carry out periodic maintenance checks on generators to be able to avert potential problems. You can trust our team of electricians with the wiring of your home for the installation of a generator.

Other Reasons to Pitch Your Tent with Us:

We will give your home, office, business, store, or warehouse full electrical care services. So, you’ll not have to look for a new electrical contractor each time you have electrical jobs. Apart from all the services we offer, here are some other reasons to hire Blessed Electric.

24-hour Availability:

We don’t close for the day, and we don’t go on holidays. In fact, we work at weekends. Electrical services are emergency services. That’s why we are only a call away from you 24 hours a day, 7 days a week, and 365 days a year. You suddenly begin to perceive the smell of burning wires in the middle of the night? Don’t panic! Call us immediately. You don’t have to wait till morning to contact us.

Competitive Rates:

We believe that quality service isn’t cheap. At the same time, we also believe that quality electrical services should not cost a fortune. That’s why we struck a balance between quality and competitiveness. We offer the highest-quality services at highly competitive rates.

Expertise, Experience, and Equipment:

We can boast of the three Es (Expertise, Experience, and Equipment)that everyone looks for in their service providers. Our electricians are experienced and they have become experts in the electrical fields. Most importantly, we make use of the latest sophisticated equipment to troubleshoot electrical faults.

Do you need the services of a residential, commercial, or industrial electrical contractors? Don’t hesitate to call Blessed Electric and Air.

6 Tips for Choosing the Right Electrical Service

Are you planning to hire an electrician but you’re a little confused as to how to go about it? Well, you’re on the right page and we’re here to help. We’ll give you some steps to follow. With these tips, you’ll be able to hire a reliable Electrical Service contractor with competitive charges.

1. Start with online search

Depending on your location, you can search for an electrician in your location. For instance, people based in Dallas can search for Dallas electricians and a Round Rock resident will search for Round Rock electricians. This will return a list of electricians in your city. Take the time to click on the links of the search results. The idea is to get to the websites of the returned electrical practices to find out more about each of them.

On each of their websites, make sure to head over to their service pages to check the list of services that they offer. You need to be sure that your chosen electrical service offers the exact electrical service that you need. For instance, only few electrical contractors offer HVAC services. If you need to get your HVAC serviced or repaired, it is better to choose an electrician that lists the service on the service page of their websites.

2. Select only few electrical contractors from the list

Your online search will definitely return a long list of electricians. Try to select only 3 – 5 electrical practices from the long list of returned pages. That way, you’ll be able to scrutinize every one of them properly. Read further to know the things to find out before you hire an electrical contractor.

3. Your electrician must be licensed

This is the most important tip of all. You must ensure that your electrician is licensed and the license is up to date. Unfortunately, a lot of people overlook this, especially when the electrician was referred by someone else. The fact that an electrical contractor is skillful does not mean they’re licensed to work in Texas. They may possess the license of another state.

licensed electrician


Of course, you could hire an unlicensed electrician and go get away with it. But when something goes wrong, litigation may happen. Remember, it is a crime to hire an electrician that is not licensed in Texas. So, no matter how good the electrical contractor is, ask for their license.

4. Take quotes from at least three electricians

You need to compare charges from different electricians. That’s the only way to be sure that you’re paying a fair price. Ask at least 3 of the electricians on your consideration list to send quotes. Ensure the quotes are broken down to your understanding. And if there are areas you don’t understand, try to ask as many questions as possible. It’s your money, and you need to know where every dollar is going.

Sometimes, some electricians may also list things you don’t need just to increase their profits. Comparing quotes will help you sniff out that trick. If you check the quotes from 3 electrical contractors, and only one includes a certain component, you probably don’t need the component. So, you should query it.

5. Compare turnaround time too

In Texas, your bill will depend on the number of hours or days expended on your job. That’s why it isn’t unusual for some electrical service providers to drag their service longer than necessary. It helps them to charge higher. You need to ask for their turnaround time. For instance, if one of the electricians says your job will take 3 days and another one quotes 2 days, let the one with the longer timeframe know that you’ve seen a contractor that will finish the job in fewer days. You may even show them the quote. This may push them to rework their quote in your favor.

6. Declare that you don’t pay hidden fees

After negotiation, let your electrician know that you won’t respond to any additional fees that may come up during the project. This is because some electrical contractors may try to pull a fast one on you. They’ll come up with different stories to ask for additional fee. They will try to make it look like something unexpected happened. This is why you must let your team of electricians know that you’re not gonna pay a dime more than the quoted amount for the same job. Tell them beforehand.

Once you make such heavy declaration, the issue of hidden fees won’t come up. Even if they had such ideas, they’ll quickly ditch it.



With the 6 tips discussed above, you’ll always fall into the hands of the right Dallas electricians offering the right electrical services with the right quality at the right rate. And if you have to pick only one of the tips, choose the #3 tip – hire a licensed electrician.

What Are the Most Common Electrical Repair Needs?

Electrical faults are some of the commonest issues homeowners face here in Fort Worth. Of course, there are numerous electrical problems, but some of them are more rampant than others. Based on the information given by some experts in home electrical repair in Fort Worth, the electrical repairs listed below are the commonest ones.

Flickering Lights

Many homeowners tend to brush the issue of flickering lights aside as a minor problem, but this is often not the case. The problem is usually a sign of bigger underlying problem. And funny enough, some people decide to ignore the problem, hoping that it will normalize soon. Of course, this hardly happens.

The problem of flickering lights is caused by either a poor electrical connection or an overloaded electrical system. When your electrical system is overloaded and you disconnect some electrical appliances, it is possible for the flickering lights to stop, but that does not mean that the problem is gone.

You may have to upgrade your wiring system or your electrical panel. Whatever the case may be, the problem of flickering lights should be left for licensed providers of emergency electrical repair in Fort Worth. It is not something you should try to fix on your own.

Faulty Electrical Outlets

This is another common electrical repair. When some of your outlets suddenly stop working, you need to check your circuit breakers. It is likely that one of them has tripped off. If none of them has tripped off, then it is more likely to be a wiring problem. The wire that links the outlets may be damaged or cut off by rodents.

Also, if it is only one outlet that isn’t working, maybe that particular outlet has burned out. As a matter of fact, a failed outlet is safer than a faulty outlet that is still working. The latter could cause an electrical fire or lead to electric shocks. That’s why you should abandon any electrical outlets that are blackening out, getting overly hot, or producing sparks.

Frequent Tripping of Circuit Breakers

There are so many houses in Fort Worth that were built several decades ago and their electrical panels are yet to be upgraded. If your house is in this category and your electrical system seems fine, it’s just a matter of time for an upgrade to become necessary. However, you don’t have to wait till then. Get your electrical system inspected and carry out the required upgrade, if necessary.

When your circuit breakers begin to trip off too frequently, you may need to upgrade your entire wiring system or your electrical panel. Whatever the case may be, don’t just jump to conclusion. Let a licensed electrician in Fort Worth check the problem.

Repeated Blown Fuses

If the fuse in your fuse panel keeps “blowing” frequently, it is either that you have overloaded the system or there’s a case of short circuits. It is another common electrical repair in homes. You can only hire an electrician to get to the root of the problem.


If you’re experiencing any of the electrical issues discussed above, you need to consult an electrician as soon as possible. Don’t try to fix things yourself. In electrical works, a lot can go wrong and the consequences can be too costly.

Everything You Need To Know About Electrical Panel Upgrades

A new electrical panel (upgraded) ensures that your Home will continue to receive a steady flow of electricity. You will not only eliminate the problems of flickering lights and burnt-out equipment, but you will also be able to add more equipment (appliances) without tripping your circuit breaker, blowing fuses, or damaging electrical appliances. On average, the electrical panel upgrades in Dallas has a life expectancy of 25 to 30 years, although, with the rapid development of technology, old panels are not large enough to meet the needs of today’s appliances.

What is An Electrical Panel?

Your electrical panel, also known as an electrical service or circuit breaker panel, provides an entry point for electricity to enter your Home. Once electricity reaches your Home from your supplier, your electrical panel serves the distribution system that controls, maintains, and distributes electrical power to the many circuits in your Home.

In addition to its role in distributing power in your Home, your electrical panel also serves as the first line of protection against dangerously high levels of electricity being delivered to your Home. Whenever the electrical current becomes too erratic or reaches dangerous levels, your circuit breakers are designed to return to the off position (stop current flow). This prevents overheating, melting, fire, and more electric hazards. In analogy, having an electrical panel upgrade is like installing a modern computer to monitor your Home for you.

Advantages of A Modern Electric Panel

  • Reduces the risk of an electrical fire.
  • Monitors and maintains old and new wiring
  • Detects faults in circuits/switches and more !!!

When Should I Change My Electrical Panel?

Wondering how to tell if your electrical panel needs to be updated? Here are a few warning signs that can give you a heads-up:

  • Your lights and other appliances have sudden drops in intensity: this could mean that connections are overloaded or that some wiring is faulty.
  • The presence of fuses: They are more difficult to handle and can cause electric shocks. Fuses are now replaced by circuit breakers.
  • Presence of corrosion on the electrical panel: This is very dangerous, and you should contact an electrician immediately. Rust indicates water infiltration that can alter electrical circuits.
  • Frequent short circuits: If you experience short circuits too often, it may indicate that the power of your panel may be too low.

Reasons Why You Should Change Your Fuse System

A fuse box uses fuses to stop the flow of electricity rather than using circuit breakers. The metal filament (in the fuse) is doomed to break whenever the electrical current flowing through the fuse reaches a certain level. This will prevent the electricity from continuing through that particular circuit.

One of the greatest dangers of fuse boxes is the temptation to replace them with oversized fuses after they break. Although this may give you a greater gap between replacements, it can lead to overloading the circuit.

Most fuse boxes have been designed to handle 30 to 60 amps of power, rather than the 100 to 200 amps that the average household needs today. This makes over sizing a fuse particularly dangerous. Your best and smart bet is to upgrade your electrical panel if you live in a house that is still fused.

We Are Here To Help!

Whether you need an electrical service upgrade due to an undersized electrical service, or a panel that is inherently unsafe, it is important to remember that the safety of both your Home, your family, and your valuable electronics are on the line.

An overloaded electrical system can be just as dangerous as one with known defects. Our many years of experience allow us to perform electrical panel upgrades quickly, efficiently, and, above all, very safely. When we upgrade a panel, we also perform a good upgrade of the grounding system and MORE. Contact us for your lighting upgrades in Plano, TX it will be our pleasure to guide you and help you with this work.

What is The Cost of Bad Electrical Work?

An electrical installation is a coherent set of electrical circuits and/or electrical equipment. This installation must comply with the regulations in force in the country. A lot of people like to do their own electrical work. They think it is easy, and they have the tools at home to get it done quickly. However, this is a huge mistake for two reasons: one, they do not know what they are doing and two, electricity is dangerous! This blog post discusses some of the serious consequences that come with bad electrical work.

What is Electrical Work, and Why Is It Important?

The average cost to get your electrical work done is $500. This may seem like a lot, but when it is not handled correctly, the problems can be devastating, and you could end up paying hundreds of thousands in damage fees.

When you hire an electrician in San Marcos, Texas for electrical work, they should have all licenses needed as well as insurance coverage that will cover any accidents or damages from their services. One way to avoid needing these serious repairs is by getting professional help early on before there are major issues with wiring or outlets in your home!

The Cost of Bad Electrical Work (Fire, high electric bills, and more)

Bad electrical work can cost you a lot. It may be in the form of fires, power outages, or even worse: death! The reality is that bad electrical work has consequences, and they are not usually pretty. Here is what happens when it goes wrong:

1. People Get Injured

Sometimes these injuries lead to expensive lawsuits, which will end up costing you or your business money in legal fees as well as settlements with victims who have suffered from the injury caused by bad electrical installation.

2. It can Lead to More Safety Issues

If you’re not careful, the bad electrical work could end up even causing a fire! This is why it’s so important that people hire professionals for this type of job. Because if left unchecked, these fires could cause serious damage to your property.

3. Higher Electricity Bills

Sometimes we can be surprised by excessive consumption of electricity. We may think that it is because in a certain month we have used electrical appliances more frequently. In some cases, this is not necessarily the source of a higher bill. Faulty electrical wiring is the cause of unnecessarily high electricity bills. They can cause power surges and cause your appliances to use more electricity than necessary.

4. Frequent Failures of the Installation

Sometimes, in our own home, we have electrical problems that keep recurring, such as in the bathroom or kitchen. If you are a handyman, you may be able to patch it up and fix it, or not! Even with these repairs, you will end up having problems with outages again. To avoid bigger problems in the future, you need to call a professional electrician.

5. Power Outages

Indeed, an electrical power outage usually hides a problem with the electrical installation. This problem can be common in homes, for example, when the circuit breaker blows. This is often due to the fact that there are many electrical appliances connected at the same time, such as when the oven, air conditioning, and other appliances that consume more energy are connected.

6. Fire Hazard

This brings us to the biggest risk of a bad electrical installation. Indeed, a sudden change in voltage in a bad electrical installation can cause a fire and destroy the house or premises. In fact, more than 10% of fires in homes are caused by electrical installations.

7. Explosion

In areas where there is a risk of explosion, electrical installations, both power and control are a potential source of ignition for an explosive atmosphere. In order to reduce this risk, these installations are reduced to a strict minimum. In addition, the electrical equipment used in these areas must comply with the construction, installation, and operating conditions defined in standards.

Conclusion: What you Need to Remember

A dangerous electrical installation is not visible to the naked eye and yet can cause many accidents. The risks are therefore not negligible, especially when you know that in 2020, about 7.5 million homes are over 30 years old and no longer comply with electrical standards. The older your house or apartment is, the more outdated your installation is, and the greater the dangers. Electrical accidents are very often caused by the electrical installation itself, i.e., the sockets, the electrical wires, or the electrical panel.

With all this, it is necessary to emphasize the advantages of an electrical installation that complies with the regulations, both in the design of the installation itself, as well as in the quality of its components, safety above all!